1.0 Navigation

The camera menu is displayed on the LCD located on the back of the camera.
Four buttons are located on the top surface of the camera, reading from left to right the button funtions are;
    1. Power On / Off
    2. Enter Menu / Select
    3. Scroll UP
    4. Scroll Down
 To enter the menu display press button 2.
 To navigate the menu scroll up or down and press Select to open the associated sub menu
 To exit the menu, scroll to “DONE” and press select or press the camera shutter release.
 To change a specific configuration item, navigate to the item and press Select. The associated item will turn from white to green. 
 Use the Up and Down buttons to toggle through possible settings. 
 When required setting is displayed, press Select to set it, item will turn to white from green.

2.0 Main Menu

The main menu provides several sub-menus. Only sub-menus that can provide meaningful options
will be active at any time.

The sub-menus are;

Review – Opens review submenu
Info - Displays camera info including battery state, firmware version, memory free and used.
Record - Opens record submenu
Process - Opens process submenu
Setup - Opens setup submenu
Done - Exit the menu

The following sections describe the specific submenu functions.

3.0 Review  Submenu Items

	Thumbnail – Displays thumbnails of images, use Up and Down buttons to scroll.
	Fullscreen – Displays full image on LCD, use Up and Down buttons to scroll.
	Directory – Displays a list of images, use Up and Down buttons to scroll. Press Select to
		     Display image and associated data. 
	Zoom Screen – Display zoomed image, similar to Fullscreen.
	Slide Show – Run slide show of all images, use Up and Down buttons to scroll. Press Select to
		        Display image and associated data. Scroll to first or last image to exit.
	Delete All – Deletes all images.
	Done – Exit submenu, return to Main menu.

4.0 Info Submenu

	The Info screen displays basic camera information.
   	Battery: describes battery state
	Version: firmware version
	Memory
		Used: memory used by captured images
		Free: memory remaining	
		Size: size of installed Compact Flash card

5.0 Record Submenu Items

              	The following items affect the QuickTime recording properties only;
	Exp – Allows selection of auto exposure or auto +- compensation of up to 2.5 stops
	Format – Allows selection of Fine, Economy or Zoom2x
	Save – Saves settings

6.0 Process Submenu Items

	The following items affect Jpeg compressed images only;
	Jpg – Allows selection of Jpeg compression level
	Contrast – Allows selection of Gamma applied to jpeg images
	White – Allows selection of auto or several illumination type white balance settings
	Save – Saves settings

7.0 Setup Submenu Items

	Timeout – Sets camera auto shutdown timer	
	Show – Sets picture quick review timer
	Date/ Time – Allows date and time settting
	QuickVw - Opens the Quick Review submenu
	Review - Allows toggle of Review Mode
	Restore Defaults – Resets these settings to camera defaults
	Format – Allows format of CP card
	DPCM – Allows toggle of lossless compression
	Lang – Selects menu language
	Fixed Exp – Allows selection of auto or a fixed exposure time
	Zoom – Toggles zoom of quick review display
	Color - Toggles from Color to Monochrome operation
	Save – Saves settings
	
8.0 QuickVw Submenu Items

	Mode - Toggles thru three modes of image display;
		Raw - A "false color" processed image
		IPVI Mono - A grayscale IPVI of the raw image
		IPVI Color - A "palletized" IPVI image. 
	Time - Allows setting the Quick Review display period from 0 to 10 seconds
	Done - Exits the submenu